A quick ‘walk around’ of the Garrett AT Max International, covering all the main features of the new machine. www.garrettaustralia.com.au
Tag Archives: metal detecting Australia
Metal Detecting the Outback: ‘Malaytown’ Part 4: Garrett AT Pro International.
Gold Nuggets found with the Garrett ATX.
Gold nuggets and .925 silver recovered with the Garrett ATX in the Golden Triangle, Victoria, Australia. The video includes a ‘start to finish’ live dig on a lovely 2.3 gram solid gold nugget (recovered at a depth of 20cm/8 inches – plus the leaf litter & deadfall), a Sterling Silver 1891 Victoria Threepence, and a second nugget weighing in at 1.0 gram. Thanks for watching and subscribing.
Gemboree 2015 – Horsham, Victoria.
If you are in Horsham, Victoria, over the Easter long weekend, we will be at the Gemboree 2015 with Garrett Australia & Cordell Kent from The Mining Exchange Gold Shop, Ballarat. Drop by and say g’day and share a few of your bush adventures and stories with us. We will be happy to demonstrate any of the range of Garrett Metal Detectors. See you there! Warren.
Garrett Pro-Pointer AT.
The new Garrett Pro-Pointer AT is much more sensitive than the original Pro-Pointer. Shown is a 0.15 gram nugget which the new detector easily isolated in ‘maximum’ sensitivity mode. The Pro-Pointer AT has a real ‘sweet spot’ on the shaft approximately 1-2cm from the tip (where the nugget is resting), ideal for sifting through excavated soil in a ‘sweeping’ motion to recover those tiny sub-grammers.
ATX Gold Nugget.
ATX Relic Hunting.
Garrett ATX: 20″ Deepseeker Monoloop Coil.
In this short demonstration video, we check the response of the Garrett ATX with the optional 20″ x15″ Deepseeker Monoloop Coil on larger, deeper targets. For this purpose we bury a 300gm lead ‘nugget’ (we didn’t have an actual 10-ouncer to hand!!) in mineralized Australian soil. This is purely for illustrative purposes and is not meant to be a “will detect target X at depth Y” demo — there are too many variables in the field for tests of this nature to be definitive. The big mono will, of course detect targets of 300gm/10oz at much greater depths, dependent on field conditions and control settings, and operator technique. In addition to the target response segment, we also demonstrate the use of the Garrett sling and do a ‘real time’ coil change.
We hope you enjoy this short demonstration and find it informative. More ATX goldfields videos to follow soon! Happy Prospecting! Warren and Colleen. www.nqexplorers.com www.garrettaustralia.com.au www.garrett.com
Garrett ATX in Australia: Setup and Controls.
This is a brief run through on the new Garrett ATX Extreme Pulse Induction metal detector. In this video we look at unpacking and deployment, coil changing, battery changing and general operation of the controls. The ATX was extensively tested in Australia in the world’s most challenging conditions for a metal detector – from the volcanic soil of North Queensland to the ironstones of the Western Australian goldfields. In these conditions the ATX performed smoothly and found small gold in areas that had previously been ‘flogged out’ by other PI detectors. We hope you enjoy this brief introduction to the ATX – we will be heading out to the goldfields in the coming weeks to bring you more videos of the ATX. Thanks for watching – Colleen and Warren.
Our new Garrett ATX.
We are pleased to announce that we have received our new Garrett ATX Extreme Pulse Induction detector courtesy of Garrett Australia. In the coming weeks we will be uploading videos featuring the ATX with our first video being
an ‘unboxing’ and run through of the basic functions and controls. We will be then undertaking field trips utilizing the ATX for relic hunting in highly mineralized soils, and of course, prospecting in the goldfields. Happy Hunting! Colleen and Warren.